top of page
Smerigliatrice elettrica

PROCESSING

WELDING - CUTTING BEAMS AND TUBULARS - PUNCHING - GALVANIZING - DRILLING / NOTCHING - PLASMA CUTTING / OSSITAGLIO - STEEL STRUCTURES / MEDIUM HEAVY CARPENTRY

CUTTING BEAMS AND TUBULARS

The cutting, primary processing on every type of steel product, is managed at NEW STEEL with technologically advanced machinery and by sector workers with great experience and skills.
On the finished product this translates into absolutely reliable and very high precision materials.
The programming of the operating machines can be performed using the designer / customer's CAD / CAM design software. This simplicity of interfacing between the customer and the company makes sure the correspondence of the finished product to the designer's request.

The precision cut stands out above all in the bevel cut, and that's where NEW STEEL really makes the difference!
We can perform any type of cut and according to any pattern provided by the designer, below you will find a pattern of conventional cuts that we are able to perform with a margin of error of less than 0.5 °

AdobeStock_509521979_edited.jpg
AdobeStock_374564907.jpeg

WELDING

The WELDING is a technical_cc781905_bc781905-5cde-3194-metal coupler that makes the connection of two pieces of metal or 136bad5cf58d material (FILLER METAL) and under the action of heat. The FILLER METAL is distributed in the molten state between the suitably prepared edges (caulking) of the pieces to be connected.
At NEW STEEL we carry out types of welding, from the one with pegs  to fortify the concrete structures, to the wire welding:  La_cc781905-5cde-3194bad-136 continuous thread is named so because the filler material is used in the form of a coil of filo  which runs inside the torch.
Continuous wire welding means to connect an appropriate gas cylinder to the welding machine. The gas has the same function as the electrode coating in the Welding a Electrode: protects the welding a Electrode: protects the_cc781905-5cde-3194-bb3b-136bdc7-136bcc5-136bcc3 damage can cause oxygen on the welding  itself.

PUNCHING

The concept of punzonatura  designates a cutting process in which a sheet is severed in one stroke. The punch presses the material  against the drill stand and finally into a round opening.

The operation of making a hole, or of impressing numbers, letters, symbols or abbreviations in a metal surface, by means of a punch which, in manual execution, is struck with a hammer.

Punching NEW STEEL  is applied to sheet metal and other steel products.
It can be used to give more grip to the sheets or to make them easily identifiable .

Visualizza foto recenti.png
AdobeStock_392220246.jpeg

GALVANIZING

La  hot dip galvanizing  is an anticorrosive treatment of steel that is applied by immersing the articles in a bath of molten zinc after a series of pre-treatments.
We are able to galvanize any type of support such as beams, lattices, railings for balconies, stairs and much more

DRILLING

The beam drilling in steel constructions allows the connection between the various structural elements. The various types of holes differ from each other according to the diameter and according to the bolt used for anchoring.
The drilling in the beams and in the other NEW STEEL products is carried out with very high precision helical drill bits.

AdobeStock_399757509.jpeg
AdobeStock_353838622.jpeg

PLASMA CUTTING

The process of plasma cutting allows to metal_cutting_cc781905 badges through a number of types of bbc58905-136bcc3905-badges_c -3194-bb3b-136bad5cf58d_plasma. During the process, a gas is expelled at high speed through a nozzle, establishing an electric arc between the electrode and the element to be treated, and thus transforming the gas into plasma.

MEDIUM HEAVY METAL CARPENTRY AND STEEL STRUCTURES

La Medium-heavy carpentry  includes all the processes that are obtained through a complex metal structure that has the purpose of supporting the heavy weight of civil or industrial buildings, such as for example the roofs, but also the internal and external stairs.

Metal constructions are building works whose struttura carrier is made entirely of steel.

LA NEW STEEL   deals with the design and construction of structures in  metal carpentry

We have a long experience in the field of machining both heavy and light steel structures.

Each type of structure is designed according to the customer's needs, the structures built range from walkways with expansion joints, composite beams, tailored to the calculations of our technicians, shelters, curtain walls, safety stairs, floors and so on. concerns the construction of steel structures.

LAVORAZ.jpg
bottom of page